1、大理石所用板塊的品種、規格、質量應符合甲方要求。執行國家相關標準，石材表面無色差、無裂紋、無劃痕，材料不允許出現染色。

　　1. The variety, specifications, and quality of the marble blocks used shall meet the requirements of Party A. According to relevant national standards, the surface of the stone should be free of color difference, cracks, and scratches, and the material should not be dyed.

　　2、面層的表面應清潔，平整、無磨痕，而且圖案清晰、色澤一致、拼縫均勻、周邊順直、鑲嵌正確、板塊無裂痕、掉角、缺棱等缺陷。

　　2. The surface of the surface layer should be clean, smooth, and free of scratches, with clear patterns, consistent color, uniform joints, straight edges, correct inlaying, and no defects such as cracks, missing corners, or edges in the panels.

　　3、面層表面坡度應符合設計要求，不倒泛水、無積水，與井道結合處應嚴密牢固。

　　3. The surface slope of the surface layer should meet the design requirements, without overflow or water accumulation, and the joint with the well should be tight and firm.

　　4、石塑棗莊不銹鋼啞口套   面層與基底安裝牢固，碳鋼配件及焊接點須做防腐、防銹處理。

　　4. The Shisu Zaozhuang stainless steel mute cover layer is firmly installed on the base, and the carbon steel fittings and welding points must be treated with anti-corrosion and rust prevention.

　　5、踢腳線表面潔凈、高度一致、結合牢固、出墻厚度一致。

　　5. The surface of the skirting board is clean, the height is consistent, the bonding is firm, and the thickness of the wall is consistent.

　　6、厚度要求：所有材料均須按甲方要求厚度加工，不允許有下差。

　　6. Thickness requirement: All materials must be processed according to the thickness required by Party A, and no deviation is allowed.

　　7、表面平整度允許偏差1mm.

　　7. The allowable deviation for surface flatness is 1mm

　　8、縫格平直方正允許偏差2mm.

　　8. The allowable deviation for a straight and square seam grid is 2mm

　　9、拼縫高低差允許偏差0.5mm.

　　9. The allowable deviation for the height difference of the joint is 0.5mm

　　10、踢腳線上口平直允許偏差1mm.

　　10. The upper opening of the skirting board is straight, with a permissible deviation of 1mm

　　11、板塊間縫寬度允許偏差1mm.

　　11. The allowable deviation for the width of inter plate joints is 1mm

　　以上是驗收棗莊不銹鋼啞口套   需要滿足的相關要求。

　　The above are the relevant requirements that need to be met for the acceptance of Zaozhuang stainless steel mute sleeve.

　　本文由 棗莊不銹鋼啞口套    友情奉獻.更多有關的知識請點擊  http://www.zzhzbsx.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Zaozhuang Stainless Steel Mute Cover For more related knowledge, please click http://www.zzhzbsx.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.